If you connect them by wireless ethernet, you should make sure that wireless communication is enabled and the IP configuration is properly set using the MDI(MDI 2) Manager software. Try connecting to other USB ports on the PC.Ģ: GM MDI(MDI 2) connection by wireless ethernet GM MDI(MDI 2) Manual: What if MDI(MDI 2) fails to connect on USB interface?ģ.Verify a USB Hub is not being used (MDI has a fixed USB address).Ĥ.Verify that only one MDI(MDI 2) is connected to your PC using USB.ĥ.Verify the USB driver has been installed on the PC (look for device name ‘ETAS USB Remote NDIS Network Device’ under Network Connections). If it is not running, check all USB ports on the PC and verify that the MDI(MDI 2) is powered on. Then check for the device name ETAS USB Remote NDIS Network Device. Open the Network and Dial-up Connections Window from the Windows Control Panel. About the solutions, you can connect the MDI to the PC USB port and power up the MDI(MDI 2). If the MDI(MDI 2) can not communicate with the MDI(MDI 2), you should check the cables if they are securely attached to the MDI(MDI 2), if the MDI(MDI 2) has completed its power up sequence, if the connector pins are clean and if the MDI(MDI 2) Manager software is running.Īnd if you connect them by USB, you need to check the MDI(MDI 2) USB connection is detected by windows. If the USB is available, the MDI(MDI 2) will connect by using the USB and if not, the MDI(MDI 2) will connect by using wired ethernet and if neither of them is available, the MDI(MDI 2) will connect by using wireless. Here are all solutions aimed to help fix GM MDI( MDI 2) multiple diagnostic interface connection/communication issues (connection by usb, wireless ethernet, wired ethernet)…įirst, you should make sure that the MDI(MDI 2) Manager software should be installed on the PC and the MDI(MDI 2) must be powered up before you use it to communicate.Īlso the MDI(MDI 2) should be configured for wired ethernet or wireless communication. – Net.framework ( at least v4.0 the v4.8 is better ) Your windows system is missing something as: GM MDI（MDI 2 has to be seen in the Manager.Īlso you have to have latest VC++ and latest net.framework installed to be sure.

You need Windows 7 ot 10 X86 or X64 and latest GM MDI（MDI 2） installed. I bought a GM MDI (MDI 2), I have a problem with my GDS2 Software I think, every time I use gds2 to connect to the mdi, it goes from red to yellow to green and then it disconnects saying not mdi(MDI 2) found.įor instance Java issue is coming because you have not installed the Java or GDS2 Java.Īlso check if you have Tis2web installed.

Gm tech 2 software for windows usb